Saddlebag "Boston" 28 litres complete set 19 mm axle suitable for HD Dyna - left
Product weight:
9 kg
Item shipping:
Standard shipping
- Saddlebag "Boston" - Made of 3 mm thick, elaborately impregnated buffalo leather
- Volume: 28 litres
- Mounting side: left
- Load weight: max. 10 kg
- Colour: black
- Dimensions (WxHxD): approx. 42 x 40 x 20 cm
- Incl. "Easy-Fit" bracket, removable, mounting on existing attachment points
- Incl. distance roll, fixed, for 19 mm axle diameter
- Incl. turn signal relocation kit
Saddlebag "Boston" 28 litres complete set 19 mm axle suitable for HD Dyna - left
Saddlebag "Boston" 28 litres with removable "Easy-Fit" bracket, distance roll and turn signal relocation kit suitable for Harley-Davidson Dyna models (1991-2017). Not suitable for the Fat Bob (2008-2017).
Info:
- Can be mounted in combination with HD sissybar bracket or removable sissybar
- No drilling necessary
- With retaining pins (bungee nuts), which are screwed to the fender struts
- Can be attached and removed in seconds
Saddlebag:
- Approx. dimensions (WxHxD): 42 x 40 x 20 cm
- Genuine, silky matt 3 mm strong buffalo leather (no cheap or split leather)
- 2x internal, overlapping flaps with press studs (protection against dirt and moisture)
- Elaborately water-repellent impregnated, with additionally glued seams
- Sewn-in 3 mm strong aluminium plate on the back of the bag ensures greater stability and variable attachment
- Concealed, large additional outer pocket
- Hidden quick-release fasteners under the fastening straps for quick opening and closing of the bag
"Easy-Fit" bracket:
- Detachable
- Lockable
- Material: Stainless steel
- Bracket length: 285 mm
- Hole spacing: 263 mm
Distance roll:
- Clean, ingenious solution
- Prevents unwanted contact with the drive belt and wheel
- Permanently mounted
- Material: stainless steel black powder-coated
- Axle diameter 19 mm
Please check the axle diameter. The change in axle diameter from 19 mm to 25 mm was mainly done from 2005-2007, but this cannot be clearly defined
Turn signal relocation kit:
- Offset by approx. 8 cm to the rear
- Material: stainless steel
- Required for all Dyna models 1991-2017, except Wide Glide up to 2008
Scope of supply:
- 1x Saddlebag "Boston" 28 L black
- 1x "Easy-Fit" saddlebag bracket
- 2x Bungee Nuts
- 1x Mounting material
- 1x Distance roll 19 mm
- 1x Turn signal relocation kit (1 piece)
- 1x Bottle of leather care oil (to best protect the saddlebag from environmental influences, we recommend thoroughly impregnating it with leather care oil before first use)
Note:
The axle diameter was changed from 19mm to 25mm from 2005-2007, but this cannot be clearly defined. Therefore, please check the axle diameter on your bike!
• Load weight: max. 10 kg
• Do not load the saddlebag with tools or sharp-edged objects
Hansen Styling Parts e.Kfm.
Dorfstr. 9
DE-24247 Mielkendorf
WEEE-Reg.-Nr.: DE31112252
Tel.Nr.: +49 4347 706970
E-Mail: info@hansen-styling-parts.de
Internet: www.hansen-styling-parts.de
Dorfstr. 9
DE-24247 Mielkendorf
WEEE-Reg.-Nr.: DE31112252
Tel.Nr.: +49 4347 706970
E-Mail: info@hansen-styling-parts.de
Internet: www.hansen-styling-parts.de
There aren't any asked questions yet.
Matching items
